Tradefox

Tradefox – Build Skills

Learn Construction

‹ All painting and decorating calculators

Wallcoverings

Lining paper rolls by area

A=(Aw+Ac)(1+w100)Ar=LrbNr=⌈AAr⌉
where
A
area including waste (m²)
Aw
wall area to line (m²)
Ac
ceiling area to line (m²)
w
waste allowance (%)
Ar
coverage of one roll (m²)
Lr
roll length (m)
b
roll width (m)
Nr
rolls needed
Explain this equation

Works out lining paper rolls by area, which is good enough because lining paper has no pattern to match.

Wall and ceiling areas are added and increased for waste. A roll covers its length times its width. Dividing and rounding up gives the rolls.

Area divided by coverage per roll.

Sense check: 50 m² plus 10% is 55 m²; 20 m rolls 0.53 m wide cover 10.6 m² each, so 6 rolls.

Watch out: cross-lining (horizontal) under wallpaper often wastes more at the corners and openings.

Works out rolls of lining paper from the area. Plain lining has no pattern to match, so an area method with a waste allowance is fine.

m²
m²
%

Enter your values to see the result.

Good to know

Lining paper is sold in grades (800–2000, heavier for poorer walls) and commonly in 20 m × 0.53 m double rolls; single rolls are 10 m. Graham & Brown suggest about 10% waste. Walls to be papered are usually cross-lined (horizontally) so the joints do not line up with the finish paper; walls to be painted are usually hung vertically.

Common mistake

Using the area method for patterned paper. It is only reliable for plain lining.

Limits

Use the wallpaper roll calculator for patterned or full-height finish papers.

Sources

Results are calculations from the published methods and figures shown, and depend on the data you enter. Coverage depends on the product, surface and application. Always follow the paint and wallcovering manufacturers’ data sheets and BS 6150 / BS 8000-12. Check prices and VAT with your own records and HMRC.

Secret Link