Tradefox

Tradefox – Build Skills

Learn Construction

‹ All carpentry calculators

Materials

Flooring packs

Ao=A(1+w100)N=⌈Aoc⌉
where
Ao
order area (m²)
A
net area (m²)
w
waste (%)
N
whole packs
c
pack coverage (m²)
Explain this equation

Works out how many packs of flooring to buy from the net floor area, a waste allowance and the coverage stated on the pack.

A is the net area to be covered, in m². w is the waste percentage. Ao is the area to order once waste is added. c is the coverage of one pack in m². N is the number of whole packs. The calculator also shows the coverage you will actually receive.

The waste factor (1 + w/100) increases the area to cover cuts and offcuts. Dividing by pack coverage gives the number of packs, and ⌈ ⌉ rounds up to whole packs.

20 m² with 10% waste is 22 m²; at 2.2 m² per pack that is exactly 10 packs. Patterns such as herringbone usually need a higher waste figure.

Watch out: use the coverage printed on the pack, not a calculation from board sizes. The two can differ.

Estimate flooring packs from net area and declared pack coverage.

m²
%
m²

Enter your values to see the result.

Good to know

Use product coverage, pattern-specific waste and manufacturer expansion requirements. Does not establish a laying layout.

Limits

Flooring gaps, slide clearances, fire-door gaps, fixing schedules and finishes must follow the design and product instructions.

Sources

This is a calculation aid, not a structural design or compliance certificate. Every default is an example, not a specification for your project.

Worked example

A hallway and landing of 14.6 m² net, with plenty of door frames and short runs so 12% waste is allowed, using packs that cover 1.73 m²: order area = 14.6 × 1.12 ≈ 16.35 m²; packs = ceil(16.35 ÷ 1.73) = 10, giving 17.3 m² supplied. The roughly 0.95 m² spare over the order area is worth keeping back for future repairs.

Common questions

What makes the waste figure go up?
Lots of doorways, alcoves, pipes and short runs all create offcuts that are too short to reuse. Long boards in a small room also waste more, because each row end cut is a bigger share of the board.

Should I include the floor under kitchen units or fitted wardrobes?
Only if the flooring actually goes under them. Some floating floors should not be trapped under heavy fitted units, so check the product instructions and measure the net area you will really cover.

Is it worth buying one more pack than the calculator says?
If the supplied coverage is very close to the order area, often yes. Boards from a different batch can vary slightly in shade, so a spare pack from the same batch makes later repairs easier.

Scroll to Top
Secret Link