Tradefox

Tradefox – Build Skills

Learn Construction

‹ All carpentry calculators

Framing

Noggins between uniform members

l=c−tN=brL=Nl1000
where
l
noggin clear length (mm)
c
centres (mm)
t
member thickness (mm)
N
noggin count
b
bays
r
rows
L
total cut length (m)
Explain this equation

Works out the cut length, number and total length of noggins fitted between evenly spaced studs or joists.

c is the centre spacing of the members and t their thickness, both in millimetres. l is the clear gap a noggin must fill. b is the number of bays and r the number of noggin rows. N is the noggin count, and L the total cut length in metres.

Between two centres you lose half a member thickness at each side, which is one full thickness in total. So the clear length is c − t. Each bay gets one noggin per row. The /1000 turns the total from millimetres into metres.

400 mm centres with 47 mm studs gives 353 mm noggins. 9 bays and 2 rows need 18 pieces, about 6.35 m.

Watch out: there is no allowance for cutting waste, staggered rows or out-of-line members. Check a real gap before cutting a batch.

Calculate one noggin per bay per row between equal-thickness members.

mm
mm

Enter your values to see the result.

Good to know

Includes no trimming waste, stagger offsets or end rebates. Check the actual gap before cutting.

Sources

This is a calculation aid, not a structural design or compliance certificate. Every default is an example, not a specification for your project.

Scroll to Top
Secret Link