{"id":20964,"date":"2026-09-11T09:54:03","date_gmt":"2026-09-11T09:54:03","guid":{"rendered":"https:\/\/tradefoxapp.com\/?p=20964"},"modified":"2026-09-11T11:15:24","modified_gmt":"2026-09-11T11:15:24","slug":"roof-rafters","status":"publish","type":"post","link":"https:\/\/tradefoxapp.com\/fr\/roof-rafters\/","title":{"rendered":"Roof Rafters Explained: Birdsmouth Cuts, Spacing and Load Paths"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"20964\" class=\"elementor elementor-20964\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-bd69d62 e-flex e-con-boxed e-con e-parent\" data-id=\"bd69d62\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-cfb4151 elementor-widget elementor-widget-text-editor\" data-id=\"cfb4151\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Roof rafters are the inclined structural members that form the sloping frame of a pitched roof, running from the ridge down to the wall plate. In a traditional cut roof they work alongside purlins, ceiling joists and the ridge board to carry the roof covering, move loads down into the supporting walls, and resist wind uplift. Getting them right is not optional detailing. It is the difference between a roof that stands for a century and one that sags, spreads or fails an inspection.<\/span><\/p><p><span style=\"font-weight: 400;\">This guide is written for carpenters, roofers and apprentices working toward competence on site. It assumes you are working under Building Control and, where spans or loadings demand it, alongside a structural engineer. It is not a substitute for project-specific calculations.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aaa62e0 e-flex e-con-boxed e-con e-parent\" data-id=\"aaa62e0\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b4791e0 elementor-widget elementor-widget-heading\" data-id=\"b4791e0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">What Roof Rafters Do\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-076e21a elementor-widget elementor-widget-text-editor\" data-id=\"076e21a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Every rafter has one job broken into three parts:<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7278d23 elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"7278d23\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Support the roof covering and any imposed loads such as snow, maintenance access and wind.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Hold its own shape under that load without excessive deflection.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Pass everything it carries safely into the structure below.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-158c8aa elementor-widget elementor-widget-text-editor\" data-id=\"158c8aa\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">In a traditional cut roof the common rafters bear on a timber wall plate at the eaves and against the ridge board at the apex. Purlins provide intermediate support to reduce the clear span, and ceiling joists act as ties across the bottom of the roof to stop the walls being pushed outward.<\/span><\/p><p><span style=\"font-weight: 400;\">That triangulation matters. Without an effective tie at the feet, a pitched roof exerts horizontal thrust on the wall heads, and masonry does not like being pushed sideways. Approved Document A (Structure) confirms that a traditional cut timber roof using rafters, purlins and ceiling joists generally has good built-in resistance to instability and wind forces, provided it is braced and detailed correctly. That word &#8220;provided&#8221; carries weight. Resistance is designed in, not assumed.\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7e589b0 elementor-widget elementor-widget-heading\" data-id=\"7e589b0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">A Note on Which Regulations Apply\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6a86e8f elementor-widget elementor-widget-text-editor\" data-id=\"6a86e8f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Approved Document A is the governing guidance for <\/span><b>England<\/b><span style=\"font-weight: 400;\"> (and excepted energy buildings in Wales). Scotland works to the Building Standards Technical Handbooks, and Northern Ireland to Technical Booklet D. The principles below hold across the UK, but always confirm the specific regime and current version for your project before work starts.\u00a0 <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-875096d e-flex e-con-boxed e-con e-parent\" data-id=\"875096d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-cdee641 elementor-widget elementor-widget-heading\" data-id=\"cdee641\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Rafter Sizing and Timber Grade\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5e69e4a elementor-widget elementor-widget-text-editor\" data-id=\"5e69e4a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">You do not guess rafter dimensions. Sizes come from span tables based on timber strength class, spacing, roof pitch, and the imposed and dead loads acting on the roof.<\/span><\/p><p><span style=\"font-weight: 400;\">Most structural softwood in UK roofing is graded <\/span><b>C16 or C24<\/b><span style=\"font-weight: 400;\">. C24 is stronger and stiffer, so for a given load it will span further or allow a smaller section than C16. Typical span tables for C24 rafters cover pitches in the 15 to 45 degree range under standard UK dead loads for tiles, felt and battens.<\/span><\/p><p><span style=\"font-weight: 400;\">As a working rule, C16 timber or a heavy covering such as natural slate or clay tiles will cut the permissible span by roughly 10 to 15 percent compared with C24 under a light covering. Always work from the actual table for your grade, spacing and load. Never carry a remembered figure from the last job onto this one.<\/span><\/p><p><span style=\"font-weight: 400;\">Where a span exceeds the table limits, or the roof geometry is complex, the design goes to a structural engineer for calculation to BS EN 1995-1-1 (Eurocode 5), which is now the standard basis for new timber design work in the UK. Complex geometry includes long spans, unusual pitches, roof lights, dormers and heavy finishes. The older BS 5268 permissible stress approach has been superseded for new design.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-6a450b9 e-flex e-con-boxed e-con e-parent\" data-id=\"6a450b9\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4293f7e elementor-widget elementor-widget-heading\" data-id=\"4293f7e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Rafter Spacing and Centres\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-aae6373 elementor-widget elementor-widget-image\" data-id=\"aae6373\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"825\" height=\"550\" src=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres.png\" class=\"attachment-large size-large wp-image-20970\" alt=\"Rafter Spacing and Centres\" srcset=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres.png 825w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres-300x200.png 300w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres-768x512.png 768w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres-18x12.png 18w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Rafter-Spacing-and-Centres-600x400.png 600w\" sizes=\"(max-width: 825px) 100vw, 825px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-92b9498 elementor-widget elementor-widget-text-editor\" data-id=\"92b9498\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Standard rafter spacing in UK domestic roofing is <\/span><b>400mm or 600mm centres<\/b><span style=\"font-weight: 400;\">, measured centre to centre. Those figures are not arbitrary. They align with sheet material widths and with the span capacity of tiling battens and any boarding, so the whole assembly works together.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-425a1c0 elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"425a1c0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>400mm centres <\/b>let you use a smaller rafter section or span further, and suit heavier coverings.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>600mm centres <\/b>use less timber but demand a deeper section, and suit lighter roofs better.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6ea20fa elementor-widget elementor-widget-text-editor\" data-id=\"6ea20fa\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">You will also see non-standard centres on refurbishment and extension work where rafters tie into an existing structure, and drawings will specify these explicitly. Whatever the figure, it must match what the span table or engineer specified. If the covering, the batten gauge and the rafter centres are not coordinated, something in the chain is overloaded. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-7143260 e-flex e-con-boxed e-con e-parent\" data-id=\"7143260\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8ac8003 elementor-widget elementor-widget-heading\" data-id=\"8ac8003\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">The Birdsmouth Cut\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c6a08d3 elementor-widget elementor-widget-text-editor\" data-id=\"c6a08d3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">The birdsmouth is the notch cut into the underside of a rafter where it sits over the wall plate. It gives the rafter a flat seat to bear on and a vertical face to sit against, spreading the bearing load and locating the rafter positively on the plate. A rafter that simply rests on a sawn edge has almost no bearing area and will crush or slip.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5e20d83 elementor-widget elementor-widget-heading\" data-id=\"5e20d83\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">The Two Cuts\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-26dd8ee elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"26dd8ee\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>The seat cut (level cut) <\/b>is the horizontal face that bears flat on the wall plate. When the rafter is in position this cut sits level, so its angle is 90 degrees minus the roof pitch, marked from the square face of the timber.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>The plumb cut (heel cut) <\/b>is the vertical face that sits against the outer edge of the wall plate. When the rafter is up, this cut is truly plumb.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2432238 elementor-widget elementor-widget-heading\" data-id=\"2432238\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">The One-Third Rule\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a2151a0 elementor-widget elementor-widget-text-editor\" data-id=\"a2151a0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">The critical rule with any birdsmouth is depth. The notch should not remove more than one third of the rafter depth. Cut deeper and you seriously weaken the rafter at exactly the point where shear and bearing forces are highest, right over the support.<\/span><\/p><p><span style=\"font-weight: 400;\">On a 150mm deep rafter that means the seat cut should not exceed 50mm into the timber. This is a common failure point, and Building Control inspectors look for it. If a deeper seat is unavoidable, the detail needs redesigning, not overcutting.<\/span><\/p><p><span style=\"font-weight: 400;\">Mark angles with a speed (rafter) square using its rafter tables. Cut one rafter as a test piece, offer it up, and only when it seats cleanly and lands the ridge correctly do you use it as the pattern for the rest. Marking one and cutting the batch off it stops cumulative error creeping across the roof.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ea48ca5 e-flex e-con-boxed e-con e-parent\" data-id=\"ea48ca5\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-195096c elementor-widget elementor-widget-heading\" data-id=\"195096c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Load Paths: Where the Forces Actually Go\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b278108 elementor-widget elementor-widget-text-editor\" data-id=\"b278108\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Understanding the load path is what separates a tradesman from someone who just cuts timber to a drawing. The whole point of the roof frame is to move load, and you should be able to trace it.<\/span><\/p><p><span style=\"font-weight: 400;\">Start at the top. The covering, battens and any snow or wind load sit on the rafters. Each rafter carries that load partly up to the ridge and partly down its length to the eaves. Purlins intercept the rafter mid-span, shortening the effective span and passing their share into the gable walls or supporting structure. At the foot, the birdsmouth delivers the vertical component of the load into the wall plate, which spreads it along the top of the wall and down into the masonry, foundations and ground.<\/span><\/p><p><span style=\"font-weight: 400;\">The horizontal component is the one that catches people out. A pitched rafter wants to push its foot outward. The ceiling joists, nailed to the rafter feet and running wall to wall, act as ties that resist that spread and keep the triangle closed.<\/span><\/p><p><span style=\"font-weight: 400;\">This is why alterations are not a site decision. Removing or notching a structural tie during a loft conversion requires an engineered replacement, such as a structural ridge or a steel, designed and signed off before any timber is cut. Weaken those ties without that solution and the walls take thrust they were never designed for. That is how you get bowed gable walls and cracked wall heads.<\/span><\/p><p><span style=\"font-weight: 400;\">Approved Document A frames the whole building as a connected box: rafters and joists provide local support to the walls and act as horizontal diaphragms transferring wind forces to buttressing elements. Diagonal bracing, equivalent to that recommended in Eurocode 5, keeps the plane of the roof stable and stops it racking under wind. On a cut roof this is often provided by rigid sarking, tiling battens, hipped ends and diagonal braces working together. It is structure, not trim, and it belongs in the spec.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-522165d e-flex e-con-boxed e-con e-parent\" data-id=\"522165d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-fbf6051 elementor-widget elementor-widget-image\" data-id=\"fbf6051\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"825\" height=\"550\" src=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections.png\" class=\"attachment-large size-large wp-image-20969\" alt=\"Fixings and Connections\" srcset=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections.png 825w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections-300x200.png 300w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections-768x512.png 768w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections-18x12.png 18w, https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Fixings-and-Connections-600x400.png 600w\" sizes=\"(max-width: 825px) 100vw, 825px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e522afc elementor-widget elementor-widget-heading\" data-id=\"e522afc\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Fixings and Connections\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7b74902 elementor-widget elementor-widget-text-editor\" data-id=\"7b74902\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Load paths only work if the connections do. Two distinct strap types are involved at roof level, and it pays to keep them straight:<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b8e862a elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"b8e862a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>Holding-down (vertical) straps<\/b> resist wind uplift, tying the wall plate down to the wall. Typically 30 x 2.5mm galvanised steel, minimum 1m long, at maximum 2m centres unless the design says otherwise.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><b>Lateral restraint straps tie <\/b>the walls to the roof against horizontal movement. Minimum 30 x 5mm, fixed per NHBC guidance and the design.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d8947e8 elementor-widget elementor-widget-text-editor\" data-id=\"d8947e8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Strap type, size and spacing are specified by the building designer according to site wind exposure. They are not chosen by the fixer on the day.<\/span><\/p><p><span style=\"font-weight: 400;\">Skew nailing alone at the eaves is generally not enough to resist uplift on modern exposed sites, so truss clips or framing anchors are commonly specified. At the ridge, rafters bear against the ridge board and are nailed in opposing pairs so they hold each other in place. Every connection is a link in the chain from tile to ground. A correctly sized rafter with a poor fixing is still a weak roof. <\/span><\/p><p><span style=\"font-weight: 400;\">If you are learning carpentry and want more practice with roof structure basics, <\/span><strong><a href=\"https:\/\/learn.tradefoxapp.com\/\">TradeFox<\/a><\/strong><span style=\"font-weight: 400;\"> offers guided training that lets you work through practical skills at your own pace. It can help you build confidence before applying those skills on site under proper supervision.\u00a0<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ec4eea5 e-flex e-con-boxed e-con e-parent\" data-id=\"ec4eea5\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4bfaa83 elementor-widget elementor-widget-heading\" data-id=\"4bfaa83\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Safety and Compliance on Site\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-4c3539e elementor-widget elementor-widget-text-editor\" data-id=\"4c3539e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Roof work is work at height, and falls remain the single largest cause of death in UK construction. The Work at Height Regulations 2005 require proper access, edge protection and a planned safe system of work before anyone goes up. Scaffold, correct PPE and a genuine method statement are the baseline, not the paperwork you do afterward.<\/span><\/p><p><span style=\"font-weight: 400;\">On the structural side:<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-fc00dee elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"fc00dee\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">All structural roof work requires Building Control approval, and non-compliant work is both dangerous and unlawful.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Where spans, loadings or alterations fall outside the standard span tables, get engineer's calculations.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-long-arrow-alt-right\" viewbox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M313.941 216H12c-6.627 0-12 5.373-12 12v56c0 6.627 5.373 12 12 12h301.941v46.059c0 21.382 25.851 32.09 40.971 16.971l86.059-86.059c9.373-9.373 9.373-24.569 0-33.941l-86.059-86.059c-15.119-15.119-40.971-4.411-40.971 16.971V216z\"><\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">NHBC Standards reference the full suite of Eurocodes, and any warranty provider will expect the same rigour.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a8002bb elementor-widget elementor-widget-text-editor\" data-id=\"a8002bb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">Roof rafters are simple in principle and unforgiving in practice. Size them from the correct table, space them to match the covering and the battens, cut the birdsmouth no deeper than a third, tie and brace the frame so the load path closes, and fix every connection to carry what it is meant to carry. Do that, under Building Control and with an engineer where the numbers demand it, and the roof will do its job long after you have moved on to the next one. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Roof rafters are the inclined structural members that form the sloping frame of a pitched roof, running from the ridge down to the wall plate. In a traditional cut roof they work alongside purlins, ceiling joists and the ridge board to carry the roof covering, move loads down into the supporting walls, and resist wind [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":20971,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"_glsr_average":0,"_glsr_ranking":0,"_glsr_reviews":0,"footnotes":""},"categories":[39],"tags":[1999,2004,2010,2009,2007,2001,2000,2003,2005,1998,2008,2006,2002],"class_list":["post-20964","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-construction","tag-birdsmouth-cut","tag-ceiling-joists","tag-pitched-roof","tag-plumb-cut","tag-rafter-size","tag-rafter-spacing","tag-rafter-span","tag-ridge-board","tag-roof-pitch","tag-roof-rafters","tag-seat-cut","tag-span-tables","tag-wall-plate"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths<\/title>\n<meta name=\"description\" content=\"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/tradefoxapp.com\/fr\/roof-rafters\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths\" \/>\n<meta property=\"og:description\" content=\"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/tradefoxapp.com\/fr\/roof-rafters\/\" \/>\n<meta property=\"og:site_name\" content=\"Tradefox | Construction Training Online\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61561067514381\" \/>\n<meta property=\"article:published_time\" content=\"2026-09-11T09:54:03+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-11T11:15:24+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png\" \/>\n\t<meta property=\"og:image:width\" content=\"825\" \/>\n\t<meta property=\"og:image:height\" content=\"550\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Tradefoxapp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@Tradefox_app\" \/>\n<meta name=\"twitter:site\" content=\"@Tradefox_app\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tradefoxapp\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/\"},\"author\":{\"name\":\"Tradefoxapp\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/person\\\/cad3ebca9b0c18ad17cdf9222b9e4d06\"},\"headline\":\"Roof Rafters Explained: Birdsmouth Cuts, Spacing and Load Paths\",\"datePublished\":\"2026-09-11T09:54:03+00:00\",\"dateModified\":\"2026-09-11T11:15:24+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/\"},\"wordCount\":1752,\"publisher\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png\",\"keywords\":[\"birdsmouth cut\",\"ceiling joists\",\"pitched roof\",\"plumb cut\",\"rafter size\",\"rafter spacing\",\"rafter span\",\"ridge board\",\"roof pitch\",\"roof rafters\",\"seat cut\",\"span tables\",\"wall plate\"],\"articleSection\":[\"Construction\"],\"inLanguage\":\"fr-FR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/\",\"name\":\"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png\",\"datePublished\":\"2026-09-11T09:54:03+00:00\",\"dateModified\":\"2026-09-11T11:15:24+00:00\",\"description\":\"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#primaryimage\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png\",\"contentUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png\",\"width\":825,\"height\":550,\"caption\":\"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/roof-rafters\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/tradefoxapp.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Roof Rafters Explained: Birdsmouth Cuts, Spacing and Load Paths\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#website\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/\",\"name\":\"Tradefox | Construction Training Online\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/tradefoxapp.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\",\"name\":\"Tradefox | Construction Training Online\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/logo-transperent.png\",\"contentUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/logo-transperent.png\",\"width\":1024,\"height\":208,\"caption\":\"Tradefox | Construction Training Online\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61561067514381\",\"https:\\\/\\\/x.com\\\/Tradefox_app\",\"https:\\\/\\\/www.instagram.com\\\/tradefoxapp\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/tradefox-ltd\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/person\\\/cad3ebca9b0c18ad17cdf9222b9e4d06\",\"name\":\"Tradefoxapp\",\"sameAs\":[\"https:\\\/\\\/tradefoxapp.com\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths","description":"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/tradefoxapp.com\/fr\/roof-rafters\/","og_locale":"fr_FR","og_type":"article","og_title":"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths","og_description":"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.","og_url":"https:\/\/tradefoxapp.com\/fr\/roof-rafters\/","og_site_name":"Tradefox | Construction Training Online","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61561067514381","article_published_time":"2026-09-11T09:54:03+00:00","article_modified_time":"2026-09-11T11:15:24+00:00","og_image":[{"width":825,"height":550,"url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png","type":"image\/png"}],"author":"Tradefoxapp","twitter_card":"summary_large_image","twitter_creator":"@Tradefox_app","twitter_site":"@Tradefox_app","twitter_misc":{"\u00c9crit par":"Tradefoxapp","Dur\u00e9e de lecture estim\u00e9e":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#article","isPartOf":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/"},"author":{"name":"Tradefoxapp","@id":"https:\/\/tradefoxapp.com\/#\/schema\/person\/cad3ebca9b0c18ad17cdf9222b9e4d06"},"headline":"Roof Rafters Explained: Birdsmouth Cuts, Spacing and Load Paths","datePublished":"2026-09-11T09:54:03+00:00","dateModified":"2026-09-11T11:15:24+00:00","mainEntityOfPage":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/"},"wordCount":1752,"publisher":{"@id":"https:\/\/tradefoxapp.com\/#organization"},"image":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#primaryimage"},"thumbnailUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png","keywords":["birdsmouth cut","ceiling joists","pitched roof","plumb cut","rafter size","rafter spacing","rafter span","ridge board","roof pitch","roof rafters","seat cut","span tables","wall plate"],"articleSection":["Construction"],"inLanguage":"fr-FR"},{"@type":"WebPage","@id":"https:\/\/tradefoxapp.com\/roof-rafters\/","url":"https:\/\/tradefoxapp.com\/roof-rafters\/","name":"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths","isPartOf":{"@id":"https:\/\/tradefoxapp.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#primaryimage"},"image":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#primaryimage"},"thumbnailUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png","datePublished":"2026-09-11T09:54:03+00:00","dateModified":"2026-09-11T11:15:24+00:00","description":"Learn how roof rafters work, including birdsmouth cuts, spacing, load paths, timber grades, fixings, and key UK compliance points for roof work.","breadcrumb":{"@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/tradefoxapp.com\/roof-rafters\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#primaryimage","url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png","contentUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/09\/Roof-Rafters-Explained-Birdsmouth-Cuts-Spacing-and-Load-Paths.png","width":825,"height":550,"caption":"Roof Rafters Explained Birdsmouth Cuts, Spacing and Load Paths"},{"@type":"BreadcrumbList","@id":"https:\/\/tradefoxapp.com\/roof-rafters\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/tradefoxapp.com\/"},{"@type":"ListItem","position":2,"name":"Roof Rafters Explained: Birdsmouth Cuts, Spacing and Load Paths"}]},{"@type":"WebSite","@id":"https:\/\/tradefoxapp.com\/#website","url":"https:\/\/tradefoxapp.com\/","name":"Tradefox | Formation en construction en ligne","description":"","publisher":{"@id":"https:\/\/tradefoxapp.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/tradefoxapp.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/tradefoxapp.com\/#organization","name":"Tradefox | Formation en construction en ligne","url":"https:\/\/tradefoxapp.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/tradefoxapp.com\/#\/schema\/logo\/image\/","url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/03\/logo-transperent.png","contentUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/03\/logo-transperent.png","width":1024,"height":208,"caption":"Tradefox | Construction Training Online"},"image":{"@id":"https:\/\/tradefoxapp.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61561067514381","https:\/\/x.com\/Tradefox_app","https:\/\/www.instagram.com\/tradefoxapp\/","https:\/\/www.linkedin.com\/company\/tradefox-ltd\/"]},{"@type":"Person","@id":"https:\/\/tradefoxapp.com\/#\/schema\/person\/cad3ebca9b0c18ad17cdf9222b9e4d06","name":"Tradefoxapp","sameAs":["https:\/\/tradefoxapp.com"]}]}},"_links":{"self":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/20964","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/comments?post=20964"}],"version-history":[{"count":10,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/20964\/revisions"}],"predecessor-version":[{"id":21094,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/20964\/revisions\/21094"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/media\/20971"}],"wp:attachment":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/media?parent=20964"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/categories?post=20964"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/tags?post=20964"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}