{"id":10166,"date":"2025-10-23T04:57:20","date_gmt":"2025-10-23T04:57:20","guid":{"rendered":"https:\/\/tradefoxapp.com\/?p=10166"},"modified":"2025-12-16T05:21:35","modified_gmt":"2025-12-16T05:21:35","slug":"continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes","status":"publish","type":"post","link":"https:\/\/tradefoxapp.com\/fr\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/","title":{"rendered":"Test de continuit\u00e9 sur les circuits : Pas \u00e0 pas avec les sondes conformes \u00e0 la norme GS38"},"content":{"rendered":"
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Lors du test d'un circuit \u00e9lectrique, la continuit\u00e9 est l'un des contr\u00f4les de s\u00e9curit\u00e9 les plus fondamentaux. Elle permet de s'assurer que chaque conducteur, chaque connexion et chaque chemin de protection sont intacts avant que le syst\u00e8me ne soit sous tension. Mais pour effectuer ce test correctement, il ne suffit pas de brancher un appareil de mesure et d'attendre un signal sonore.\u00a0<\/span><\/p>

Il s'agit de respecter la norme BS 7671 et, tout aussi important, de s'assurer que votre \u00e9quipement de test et vos sondes sont conformes \u00e0 la norme GS38 pour des raisons de s\u00e9curit\u00e9.<\/span><\/p>

Ce guide vous guide pas \u00e0 pas dans les tests de continuit\u00e9, en expliquant les normes, la s\u00e9lection de sondes s\u00fbres et les m\u00e9thodes de test professionnelles utilis\u00e9es sur les sites domestiques et commerciaux du Royaume-Uni.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Ce que les tests de continuit\u00e9 prouvent : et pourquoi c'est important ?\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Le test de continuit\u00e9 prouve que les conducteurs d'un circuit (ligne, neutre, CPC ou liaison) forment un chemin complet et ininterrompu. Sans cela, les dispositifs de protection tels que les disjoncteurs diff\u00e9rentiels et les disjoncteurs de puissance ne peuvent pas fonctionner comme pr\u00e9vu en cas de d\u00e9faillance.<\/span><\/p>

Le test v\u00e9rifie :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tTous les conducteurs de protection sont reli\u00e9s \u00e0 la terre.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes conducteurs de liaison sont reli\u00e9s entre les syst\u00e8mes m\u00e9talliques (gaz, eau, structure).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes interrupteurs, les fusibles et les joints ont une continuit\u00e9 \u00e0 faible r\u00e9sistance.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    En termes pratiques, le test de continuit\u00e9 est la preuve de l'int\u00e9grit\u00e9 m\u00e9canique et \u00e9lectrique avant la mise sous tension.\u00a0<\/span><\/p>

    Un seul joint ouvert ou une seule connexion \u00e0 haute r\u00e9sistance peut compromettre la s\u00e9curit\u00e9 ou provoquer des d\u00e9clenchements intempestifs lorsque le circuit est sous tension.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Le GS38 expliqu\u00e9 : Pourquoi n'est-elle pas facultative ?\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    GS38<\/b> se r\u00e9f\u00e8re \u00e0 la <\/span>Note d'orientation GS38 de l'ex\u00e9cutif charg\u00e9 de la sant\u00e9 et de la s\u00e9curit\u00e9,<\/span><\/i> qui couvre les exigences minimales de s\u00e9curit\u00e9 pour les cordons de mesure et les sondes utilis\u00e9s sur les syst\u00e8mes \u00e9lectriques.<\/span><\/p>

    En bref, la conformit\u00e9 \u00e0 la norme GS38 signifie<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes pointes des sondes sont partiellement recouvertes, avec un maximum de 4 mm de m\u00e9tal expos\u00e9.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes fils sont enti\u00e8rement isol\u00e9s, \u00e0 double couche et marqu\u00e9s d'une tension nominale (g\u00e9n\u00e9ralement 1000V CAT III).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes c\u00e2bles \u00e0 fusible sont utilis\u00e9s lorsque des circuits sous tension sont test\u00e9s afin de limiter l'\u00e9nergie de d\u00e9faut.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Les tests de continuit\u00e9 sont effectu\u00e9s sur des circuits isol\u00e9s (morts), mais la norme GS38 s'applique toujours. Des accidents se produisent lorsque l'isolation n'est pas v\u00e9rifi\u00e9e correctement ou que les outils se d\u00e9gradent avec le temps. L'utilisation de sondes conformes n'est pas exag\u00e9r\u00e9e, c'est la norme professionnelle minimale.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      Outils essentiels et pr\u00e9paration\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Avant de commencer les tests, la pr\u00e9paration est essentielle \u00e0 la pr\u00e9cision et \u00e0 la s\u00e9curit\u00e9. Munissez-vous de vos outils et assurez-vous qu'ils sont en bon \u00e9tat de marche.<\/span><\/p>

      Vous aurez besoin de.. :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t
      • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tUn testeur d'installation multifonction (MFT) ou un ohmm\u00e8tre \u00e0 faible r\u00e9sistance.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
      • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tSondes et fils conformes \u00e0 la norme GS38 (v\u00e9rifier la longueur de la gaine et l'isolation).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
      • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tKit de consignation\/\u00e9tiquetage pour isoler les circuits.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
      • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tCertificat d'\u00e9talonnage (votre instrument de test doit \u00eatre \u00e0 jour).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        V\u00e9rifiez ensuite :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
        • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tL'alimentation est isol\u00e9e en toute s\u00e9curit\u00e9 au niveau de l'unit\u00e9 de consommation ou du tableau de distribution.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
        • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLe circuit est mort, \u00e0 l'aide d'un appareil de contr\u00f4le et d'un testeur de tension.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
        • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLes conducteurs sont identifi\u00e9s et \u00e9tiquet\u00e9s, en particulier lorsque plusieurs circuits partagent l'enceinte de confinement.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          La pr\u00e9paration permet d'\u00e9viter les fausses lectures et les travaux ult\u00e9rieurs, en particulier dans les cas de rec\u00e2blage ou de syst\u00e8mes multiphases.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

          \n\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Pas \u00e0 pas : Test de continuit\u00e9 des CPC\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Le contr\u00f4le de continuit\u00e9 le plus courant concerne le CPC. L'objectif est de s'assurer que chaque prise, raccord ou accessoire dispose d'une mise \u00e0 la terre continue jusqu'\u00e0 la borne principale de mise \u00e0 la terre (MET).<\/span><\/p>

          Voici la m\u00e9thode professionnelle :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t

          1. Tester d'abord les principaux liens de protection\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Avant de tester les CPC individuels, il convient de tester les principaux conducteurs de liaison de protection avec les services (eau, gaz, charpente m\u00e9tallique). Cela permet de s'assurer que l'ensemble du syst\u00e8me de mise \u00e0 la terre est en bon \u00e9tat.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t

          2. Ligne de liaison et CPC au conseil d'administration\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Le circuit \u00e9tant isol\u00e9, relier le conducteur de ligne (L) au CPC \u00e0 l'origine du circuit. Cela cr\u00e9e un chemin de boucle pour la mesure \u00e0 partir de n'importe quel point accessoire.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t

          3. Mesurer la r\u00e9sistance au point le plus \u00e9loign\u00e9\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Allez \u00e0 la prise ou au point lumineux le plus \u00e9loign\u00e9 et mesurez la distance entre la ligne et les bornes du CPC.<\/span>
          <\/span>Une valeur faible (g\u00e9n\u00e9ralement inf\u00e9rieure \u00e0 1 ohm) signifie qu'il y a continuit\u00e9.<\/span><\/p>

          Si les relev\u00e9s sont diff\u00e9rents en diff\u00e9rents points, rev\u00e9rifiez les joints ou les connexions, une borne ou une bo\u00eete de jonction mal fix\u00e9e peut introduire une r\u00e9sistance.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t

          4. Comparer et enregistrer\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Comparez les relev\u00e9s aux valeurs attendues en utilisant les longueurs des conducteurs et les surfaces de section (d'apr\u00e8s le tableau 9A du guide de l'IET sur site). Inscrivez clairement les r\u00e9sultats sur votre fiche d'essai.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

          \n\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Test de continuit\u00e9 des circuits finaux de l'anneau\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Les circuits en anneau n\u00e9cessitent une v\u00e9rification suppl\u00e9mentaire pour confirmer non seulement que le circuit est complet, mais aussi qu'il n'y a pas de ruptures ou de croisements de conducteurs.<\/span><\/p>

          Voici comment :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t
            \n\t\t\t\t\t\t\t
          • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tD\u00e9connectez les deux extr\u00e9mit\u00e9s de l'anneau au niveau de l'unit\u00e9 consommateur (L1, N1, CPC1, et L2, N2, CPC2).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
          • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tMesurez s\u00e9par\u00e9ment la r\u00e9sistance de chaque conducteur d'un bout \u00e0 l'autre.
            • Ligne (R\u2081)<\/li>
            • Neutre (R\u2099)<\/li>
            • CPC (R\u2082)<\/li><\/ul><\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
            • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tRecouper la ligne et le neutre \u00e0 une extr\u00e9mit\u00e9, puis tester entre la ligne et le neutre sur plusieurs prises. Les relev\u00e9s doivent se situer dans une fourchette de 0,05 \u03a9, sans rupture ni croisement de paires.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
            • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tR\u00e9p\u00e9ter l'op\u00e9ration pour la ligne et le CPC afin d'obtenir les valeurs R\u2081 + R\u2082 pour chaque prise.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              M\u00eames r\u00e9sultats = l'anneau est complet et \u00e9quilibr\u00e9. De grandes diff\u00e9rences = borne desserr\u00e9e ou mauvais \u00e9peron.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

              \n\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              Test des interrupteurs, des fusibles et des \u00e9quipements fixes\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              Les tests de continuit\u00e9 ne s'arr\u00eatent pas au c\u00e2blage. Vous v\u00e9rifierez \u00e9galement<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t
              \n\t\t\t\t\t\t\t
                \n\t\t\t\t\t\t\t
              • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tInterrupteurs dont les contacts s'ouvrent et se ferment correctement.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
              • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tFusibles et disjoncteurs dont les parcours internes sont continus lorsqu'ils sont en position de marche.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
              • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tContinuit\u00e9 des points d'\u00e9clairage entre la phase commut\u00e9e, le neutre et le CPC.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t

                Pour les interrupteurs, mesurer la continuit\u00e9 lorsque l'interrupteur est en position ON ; le circuit est ouvert lorsqu'il est en position OFF. Pour les \u00e9quipements fixes (tels que les thermoplongeurs ou les ventilateurs d'extraction), isoler et d\u00e9connecter une branche afin d'\u00e9viter les retours en arri\u00e8re pendant les essais.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

                \n\t\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t

                Erreurs courantes et comment les \u00e9viter\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t

                M\u00eame les \u00e9lectriciens exp\u00e9riment\u00e9s commettent des erreurs lors des tests de continuit\u00e9, souvent en raison de la pression du travail ou d'hypoth\u00e8ses.<\/span><\/p>

                \u00c0 surveiller :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                \n\t\t\t\t
                \n\t\t\t\t\t\t\t
                  \n\t\t\t\t\t\t\t
                • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLa v\u00e9rification de l'isolement n'est pas effectu\u00e9e correctement. Il faut toujours utiliser un appareil de v\u00e9rification et non le testeur lui-m\u00eame.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
                • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tTest par l'interm\u00e9diaire de neutres partag\u00e9s ou d'alimentations emprunt\u00e9es. Cela donne de faux r\u00e9sultats de continuit\u00e9.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
                • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tNe pas enregistrer syst\u00e9matiquement les r\u00e9sultats. Chaque circuit devrait avoir une trace v\u00e9rifiable.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
                • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tNe pas effectuer d'inspection visuelle. L'isolation ou les terminaisons endommag\u00e9es sont souvent visibles avant le test.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Les tests professionnels sont synonymes de patience et de processus. La rapidit\u00e9 vient naturellement une fois que la m\u00e9thode est devenue une seconde nature.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

                  \n\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  Preuves, documentation et tra\u00e7abilit\u00e9\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Conform\u00e9ment \u00e0 la norme BS 7671, partie 6, les r\u00e9sultats des tests doivent \u00eatre document\u00e9s comme preuve de la v\u00e9rification. Pour les tests de continuit\u00e9, enregistrer :<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t
                    \n\t\t\t\t\t\t\t
                  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLa r\u00e9sistance mesur\u00e9e (en ohms).<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
                  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tL'instrument d'essai utilis\u00e9 et les d\u00e9tails de l'\u00e9talonnage.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
                  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tLe nom ou les initiales du testeur et la date de la v\u00e9rification.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t

                    Les r\u00e9sultats sont ensuite annex\u00e9s au certificat d'installation \u00e9lectrique (EIC) ou au certificat de travaux mineurs.<\/span><\/p>

                    Les journaux de test num\u00e9riques d'outils tels que Megger ou Fluke Connect peuvent simplifier cette t\u00e2che, en particulier lorsqu'un audit est n\u00e9cessaire.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

                    \n\t\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t

                    R\u00e9sultat final\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t

                    Les tests de continuit\u00e9 prouvent que chaque joint, conducteur et CPC sous le pl\u00e2tre ou les goulottes fait son travail.\u00a0<\/span><\/p>

                    Lorsqu'il est bien fait, il prouve non seulement la conformit\u00e9 \u00e0 la norme BS 7671, mais aussi le savoir-faire et le devoir de diligence.<\/span><\/p>

                    Qu'il s'agisse de certifier un anneau domestique, d'inspecter un panneau triphas\u00e9 ou de remettre un am\u00e9nagement commercial, consid\u00e9rez le test de continuit\u00e9 comme votre signature sur le syst\u00e8me, une garantie qu'il est \u00e9lectriquement sain.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

                    When testing any electrical circuit, continuity is one of the most basic safety checks. It ensures every conductor, connection, and protective path is intact before any live power ever touches the system. But doing this test correctly isn\u2019t just about connecting a meter and waiting for a beep. It\u2019s about following BS 7671 and, just […]<\/p>\n","protected":false},"author":1,"featured_media":10177,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"_glsr_average":0,"_glsr_ranking":0,"_glsr_reviews":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-10166","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-electrical"],"yoast_head":"\nContinuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes<\/title>\n<meta name=\"description\" content=\"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/tradefoxapp.com\/fr\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes\" \/>\n<meta property=\"og:description\" content=\"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/tradefoxapp.com\/fr\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/\" \/>\n<meta property=\"og:site_name\" content=\"Tradefox | Construction Training Online\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61561067514381\" \/>\n<meta property=\"article:published_time\" content=\"2025-10-23T04:57:20+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-12-16T05:21:35+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"825\" \/>\n\t<meta property=\"og:image:height\" content=\"550\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Tradefoxapp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@Tradefox_app\" \/>\n<meta name=\"twitter:site\" content=\"@Tradefox_app\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tradefoxapp\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/\"},\"author\":{\"name\":\"Tradefoxapp\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/person\\\/cad3ebca9b0c18ad17cdf9222b9e4d06\"},\"headline\":\"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes\",\"datePublished\":\"2025-10-23T04:57:20+00:00\",\"dateModified\":\"2025-12-16T05:21:35+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/\"},\"wordCount\":1063,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg\",\"articleSection\":[\"Electrical\"],\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/\",\"name\":\"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg\",\"datePublished\":\"2025-10-23T04:57:20+00:00\",\"dateModified\":\"2025-12-16T05:21:35+00:00\",\"description\":\"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#primaryimage\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg\",\"contentUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg\",\"width\":825,\"height\":550},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/tradefoxapp.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#website\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/\",\"name\":\"Tradefox | Construction Training Online\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/tradefoxapp.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#organization\",\"name\":\"Tradefox | Construction Training Online\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/logo-transperent.png\",\"contentUrl\":\"https:\\\/\\\/tradefoxapp.com\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/logo-transperent.png\",\"width\":1024,\"height\":208,\"caption\":\"Tradefox | Construction Training Online\"},\"image\":{\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61561067514381\",\"https:\\\/\\\/x.com\\\/Tradefox_app\",\"https:\\\/\\\/www.instagram.com\\\/tradefoxapp\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/tradefox-ltd\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/tradefoxapp.com\\\/#\\\/schema\\\/person\\\/cad3ebca9b0c18ad17cdf9222b9e4d06\",\"name\":\"Tradefoxapp\",\"sameAs\":[\"https:\\\/\\\/tradefoxapp.com\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Test de continuit\u00e9 sur les circuits : Pas \u00e0 pas avec les sondes conformes \u00e0 la norme GS38","description":"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/tradefoxapp.com\/fr\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/","og_locale":"fr_FR","og_type":"article","og_title":"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes","og_description":"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.","og_url":"https:\/\/tradefoxapp.com\/fr\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/","og_site_name":"Tradefox | Construction Training Online","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61561067514381","article_published_time":"2025-10-23T04:57:20+00:00","article_modified_time":"2025-12-16T05:21:35+00:00","og_image":[{"width":825,"height":550,"url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg","type":"image\/jpeg"}],"author":"Tradefoxapp","twitter_card":"summary_large_image","twitter_creator":"@Tradefox_app","twitter_site":"@Tradefox_app","twitter_misc":{"\u00c9crit par":"Tradefoxapp","Dur\u00e9e de lecture estim\u00e9e":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#article","isPartOf":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/"},"author":{"name":"Tradefoxapp","@id":"https:\/\/tradefoxapp.com\/#\/schema\/person\/cad3ebca9b0c18ad17cdf9222b9e4d06"},"headline":"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes","datePublished":"2025-10-23T04:57:20+00:00","dateModified":"2025-12-16T05:21:35+00:00","mainEntityOfPage":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/"},"wordCount":1063,"commentCount":0,"publisher":{"@id":"https:\/\/tradefoxapp.com\/#organization"},"image":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#primaryimage"},"thumbnailUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg","articleSection":["Electrical"],"inLanguage":"fr-FR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/","url":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/","name":"Test de continuit\u00e9 sur les circuits : Pas \u00e0 pas avec les sondes conformes \u00e0 la norme GS38","isPartOf":{"@id":"https:\/\/tradefoxapp.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#primaryimage"},"image":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#primaryimage"},"thumbnailUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg","datePublished":"2025-10-23T04:57:20+00:00","dateModified":"2025-12-16T05:21:35+00:00","description":"Learn how to perform continuity testing step-by-step using GS38-compliant probes. Ensure safe, accurate circuit verification for UK electricians under BS 7671.","breadcrumb":{"@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#primaryimage","url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg","contentUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2025\/10\/electrician-working-near-board-with-wires-installation-connection-electrics.jpg","width":825,"height":550},{"@type":"BreadcrumbList","@id":"https:\/\/tradefoxapp.com\/continuity-testing-on-circuits-step-by-step-with-gs38-compliant-probes\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/tradefoxapp.com\/"},{"@type":"ListItem","position":2,"name":"Continuity Testing On Circuits: Step-By-Step With GS38-Compliant Probes"}]},{"@type":"WebSite","@id":"https:\/\/tradefoxapp.com\/#website","url":"https:\/\/tradefoxapp.com\/","name":"Tradefox | Formation en construction en ligne","description":"","publisher":{"@id":"https:\/\/tradefoxapp.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/tradefoxapp.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/tradefoxapp.com\/#organization","name":"Tradefox | Formation en construction en ligne","url":"https:\/\/tradefoxapp.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/tradefoxapp.com\/#\/schema\/logo\/image\/","url":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/03\/logo-transperent.png","contentUrl":"https:\/\/tradefoxapp.com\/wp-content\/uploads\/2026\/03\/logo-transperent.png","width":1024,"height":208,"caption":"Tradefox | Construction Training Online"},"image":{"@id":"https:\/\/tradefoxapp.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61561067514381","https:\/\/x.com\/Tradefox_app","https:\/\/www.instagram.com\/tradefoxapp\/","https:\/\/www.linkedin.com\/company\/tradefox-ltd\/"]},{"@type":"Person","@id":"https:\/\/tradefoxapp.com\/#\/schema\/person\/cad3ebca9b0c18ad17cdf9222b9e4d06","name":"Tradefoxapp","sameAs":["https:\/\/tradefoxapp.com"]}]}},"_links":{"self":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/10166","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/comments?post=10166"}],"version-history":[{"count":18,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/10166\/revisions"}],"predecessor-version":[{"id":11379,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/posts\/10166\/revisions\/11379"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/media\/10177"}],"wp:attachment":[{"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/media?parent=10166"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/categories?post=10166"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/tradefoxapp.com\/fr\/wp-json\/wp\/v2\/tags?post=10166"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}